HOWTO Iptables for newbies
De Gentoo Linux Wiki
| Kernel & Hardware • Red y Servicios • Portage • Relacionado con el Sistema • Servidor X • Juegos • Misceláneos |
Iptables is a userspace command line program that can plug into netfilter ( a set of hooks inside the Linux kernel that allows kernel modules to register callback functions with the network stack. ) Iptables is used to set up, maintain, and inspect the tables of IP packet filter rules in the Linux kernel.
Tabla de contenidos |
[editar] Introducción
Encontré la documentación disponible del iptables Muy dura y complicada para cualquier novato. La mayor parte requería de un amplio conocimiento de ipchains y haberse habituado a su uso. Normalmente espero en mi aproximación a un nuevo esfuerzo que sea rápido y sin muchas complicaciones, con las mínimas explicaciones. Después regreso a ello para ponerme con las más avanzadas. Este howto está diseñado con este propósito. Le mostrará cómo configurarlo con una funcionalidad básica, conseguir arrancarlo rápidamente y entonces mostrará incrementalmente los howto que agregan las políticas y reglas que pueden ayudar una conexión segura.
[editar] Guia de arranque rápido
Cree la funcionalidad básica del iptable.
[editar] Soporte del Kernel
Verifique si tiene kernel tiene soporte para el netfilter / iptables
zgrep -i netfilter /proc/config.gz CONFIG_NETFILTER=y
o
grep -i netfilter /usr/src/linux/.config CONFIG_NETFILTER=y
Si no lo tiene, necesitarás compilar iptables para que esté soportado por el kernel. Puedes realizarlo manualmente con los fuentes del kernel:
cp /usr/src/linux/.config /etc/linux-config.bak emerge sync && USE=symlink emerge -nk gentoo-sources cd /usr/src/linux cp /etc/linux-config.bak /usr/src/linux/.config make menuconfig
| Atención: Estos comandos pueden considerarse como una "mala práctica" y no deben usarse de tenazmente. Podría considerar hacer un make oldconfig antes del make menuconfig,pero todavía no se recomienda hacer copias de configuraciones de una verión del kernel a otra. |
Alternativamente, quizás encontraŕas más sencillo utilizar el genkernel. De cualquier modo, una vez tengas el menú de configuración, necesitarás habilitar lo siguiente:
| Configuración del Kernel: Netfilter |
|
Para el kernel superiores a 2.6.16 necesita activar el soporte Xtables primero, después iptables Networking ---->
Networking options ---->
Network Packet Filtering (replaces Ipchains)--->
Core Netfilter Configuration ---->
["enable"] Netfilter Xtables support (required for ip_tables)
["enable"] Netfilter Xtables_Match_State, most firewall scripts use state...including the sample here.
IP: Netfilter Configuration --->
["enable"] IP tables support (required for filtering/masq/NAT)
["enable"] Packet Filtering
IPv6: Netfilter Configuration (EXPERIMENTAL) --->
IP6 tables support (required for filtering/masq/NAT)
|
Seleciona la opción IPv6 sólo si la necesitas.
| Configuración del Kernel: Netfilter |
Networking ---->
Networking options ---->
Network packet filtering framework (Netfilter)--->
Core Netfilter Configuration ---->
["enable"] Netfilter connection tracking support--->Layer 3 Independent Connection tracking
["enable"] Netfilter Xtables support (required for ip_tables)
["enable"] "state" match support
IP: Netfilter Configuration --->
["enable"] IPv4 connection tracking support (required for NAT) required by "Layer 3 Independent Connection tracking" above (caused many headaches)
["enable"] IP tables support (required for filtering/masq/NAT)
["enable"] Packet Filtering
["enable"] REJECT target support
|
A continuación revise (Kernel 2.6.20): "Reject Target Support" neceitaŕa también habilitar las opciones siguientes o no serían cargado.
| Configuración del Kernel: Netfilter |
Networking ---->
Networking options ---->
Network packet filtering framework (Netfilter)--->
Core Netfilter Configuration ---->
["enable"] Netfilter connection tracking support--->Layer 3 Independent Connection tracking
["enable"] Netfilter Xtables support (required for ip_tables)
["enable"] "NFLOG" target support
["enable"] "conntrack" connection tracking match support
["enable"] "state" match support
IP: Netfilter Configuration --->
["enable"] IPv4 connection tracking support (required for NAT) required by "Layer 3 Independent Connection tracking" above (caused many headaches)
["enable"] IP tables support (required for filtering/masq/NAT)
["enable"] Packet Filtering
["enable"] REJECT target support
["enable"] Full NAT
["enable"] MASQUERADE target support
|
Si intentas cargar el iptables como módulo,
| Configuración del Kernel: Loadable Module Support |
|
Asegurate también que tienes activada la carga de modulos autmática en el kernel Loadable module support ---> [*] Enable loadable module support [ ] ... [*] Automatic kernel module loading |
Construyendo el kernel:
make && make modules_install
Si eres simplemente un novato (de esta guia) simplemente siga adelante y active todas las opciones como módulos - si no quieres actualizar el kernel ni siquiera tendrás que reiniciar para utilizar el iptables. Active varias opciones también.
Ya que querrás cargar también el módulo iptalbes del kernel en el arranque del sistema:
echo "ip_tables" >> /etc/modules.autoload.d/kernel-2.6 echo "iptable_filter" >> /etc/modules.autoload.d/kernel-2.6 update-modules
[editar] Basic iptables Configuration
You'll need to get the userland utilities. Don't forget to modprobe ip_tables and modprobe iptable_filter if you have built them as a module.
emerge iptables
And add it to the run time level:
rc-update add iptables default
The average home user might want something that accepts certain incoming connections but blocks everything else.
1. Save your current firewall rules iptables-save > /etc/iptables.bak
2. Open /etc/iptables.bak in your favorite text editor
3. Add the following rule(s) in appropriate order (according to your existing rules).
| Archivo: /etc/iptables.bak |
# Generated by iptables-save v1.2.11 on Tue May 10 08:06:58 2005 *filter :INPUT ACCEPT [5:952] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [1192099:595387635] # accept all from localhost -A INPUT -s 127.0.0.1 -j ACCEPT # accept all previously established connections -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT # ssh -A INPUT -p tcp -m state --state NEW -m tcp --dport 22 -j ACCEPT # ftp / webserver related -A INPUT -p tcp -m state --state NEW -m tcp --dport 20 -j ACCEPT -A INPUT -p tcp -m state --state NEW -m tcp --dport 21 -j ACCEPT -A INPUT -p tcp -m state --state NEW -m tcp --dport 80 -j ACCEPT -A INPUT -p tcp -m state --state NEW -m tcp --dport 443 -j ACCEPT # Windows / Samba -A INPUT -p tcp -m state --state NEW -m tcp --dport 137:139 -j ACCEPT -A INPUT -p tcp -m state --state NEW -m tcp --dport 426 -j ACCEPT -A INPUT -p tcp -m state --state NEW -m tcp --dport 445 -j ACCEPT # up to 5 Bit-torrent connections -A INPUT -p tcp -m state --state NEW -m tcp --dport 6881:6886 -j ACCEPT # reject everything else -A INPUT -j REJECT --reject-with icmp-port-unreachable COMMIT # Completed on Tue May 10 08:06:58 2005 |
4. Restore all rules to be part of your current configuration
iptables-restore /etc/iptables.bak
5. Save the configurations:
/etc/init.d/iptables save
And then back up your working configuration in case you break something later you can quickly revert:
cp /var/lib/iptables/rules-save /var/lib/iptables/rules.working
Now check up your iptables start-up script before adding iptables to your default runlevel:
/etc/init.d/iptables start; /etc/init.d/iptables stop; /etc/init.d/iptables start
The reason we start, then stop, then start again is because we haven't yet started the iptables script...so we must set the “initialized” status before stopping. Stopping essentially erases all settings and puts you back to zero.
[editar] GUI Alternatives
Or if you are so inclined, you can also configure iptables using the firestarter GUI (for GNOME users).
emerge firestarter
| Nota: net-firewall/firestarter in portage is masked, marked for removal on the 29th June 2007 |
or kmyfirewall (for KDE users)
emerge kmyfirewall
[editar] Firewall Hardening
In the following, we're going to further secure our now functional firewall. By the time we are through we should have a set of tested rules and policies that will prevent not only attacks to our own computer, but also attacks from our computer to the internet. Protecting others from the possibility of being attacked by one of our compromised computers is an essential and often overlooked aspect of security and common internet courtesy. I would even say for the SOHO network this is the most important aspect. Normally virus infection is only a minor nuissance to a small network and rarely results in data loss....for us 100% *nix users it practically doesn't even exist. However, since small soho networks are often less secure than larger ones they are a favorite target for crackers looking for a “launchpad” for DoS attacks or other underhanded skullduggary.
The following is offered in a piecemeal fashion in a sequence that enables the easiest step by step testing. Each step may require that something be inserted before, after, or in the middle of our existing script. This was done so that (hopefully) your network will only go down for a brief period during setup. I've done it this way because I have assumed many of you (like me) have a standalone linux firewall/server. Since my preferred method is ssh, the network going down can be a PITA involving crawling under tables and such. If you're daring, you can just copy the script at the end and run it. It should be fully functional, but I have only tested it on my system so ymmv.
[editar] Setting up environment variables
We will define our networks interfaces and various tools used in the script:
| Archivo: newfirewall.sh |
#!/bin/sh
#
# ********** VARIABLE DEFINITIONS **********
#
# External interface
EXTIF="eth0"
# Internal interface
INTIF="eth1"
# Loop device/localhost
LPDIF="lo"
LPDIP="127.0.0.1"
LPDMSK="255.0.0.0"
LPDNET="$LPDIP/$LPDMSK"
# Text tools variables
IPT="/sbin/iptables"
IFC="/sbin/ifconfig"
G="/bin/grep"
SED="/bin/sed"
AWK="/usr/bin/awk"
ECHO="/bin/echo"
# Setting up external interface environment variables
# Set LC_ALL to "en" to avoid problems when awk-ing the IPs etc.
export LC_ALL="en"
EXTIP="`$IFC $EXTIF|$AWK /$EXTIF/'{next}//{split($0,a,":");split(a[2],a," ");print a[1];exit}'`"
EXTBC="255.255.255.255"
EXTMSK="`$IFC $EXTIF|$G Mask:|$SED 's/.*Mask:\([^ ]*\)/\1/'`"
EXTMSK="`$IFC $EXTIF|$AWK /$EXTIF/'{next}//{split($0,a,":");split(a[4],a," ");print a[1];exit}'`"
EXTNET="$EXTIP/$EXTMSK"
$ECHO "EXTIP=$EXTIP EXTBC=$EXTBC EXTMSK=$EXTMSK EXTNET=$EXTNET"
# Due to absence of EXTBC I manually set it to 255.255.255.255
# this (hopefully) will serve the same purpose
# Setting up environment variables for internal interface
INTIP="`$IFC $INTIF|$AWK /$INTIF/'{next}//{split($0,a,":");split(a[2],a," ");print a[1];exit}'`"
INTBC="`$IFC $INTIF|$AWK /$INTIF/'{next}//{split($0,a,":");split(a[3],a," ");print a[1];exit}'`"
INTMSK="`$IFC $INTIF|$AWK /$INTIF/'{next}//{split($0,a,":");split(a[4],a," ");print a[1];exit}'`"
INTNET="$INTIP/$INTMSK"
$ECHO "INTIP=$INTIP INTBC=$INTBC INTMSK=$INTMSK INTNET=$INTNET"
|
[editar] iptables ACCEPTS
Ok now we're going to set up the ACCEPTs which will allow us to communicate with our server. In reality this is very ill advised. A solid firewall policy should DENY then ACCEPT. But if you do that you lose all connections while you're testing so you're not sure if your ACCEPT rules work at all. So, though we are entering this first, it will be the second to last rule set in the final script.
| Archivo: accepts-firewall.sh |
$IPT -t nat -A PREROUTING -j ACCEPT # $IPT -t nat -A POSTROUTING -o $EXTIF -s $INTNET -j SNAT --to $EXTIP # Comment out next line (that has "MASQUERADE") to not NAT internal network $IPT -t nat -A POSTROUTING -o $EXTIF -s $INTNET1 -j MASQUERADE $IPT -t nat -A POSTROUTING -o $EXTIF -s $INTNET2 -j MASQUERADE $IPT -t nat -A POSTROUTING -j ACCEPT $IPT -t nat -A OUTPUT -j ACCEPT $IPT -A INPUT -p tcp --dport auth --syn -m state --state NEW -j ACCEPT $IPT -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT $IPT -A OUTPUT -m state --state ESTABLISHED,RELATED -j ACCEPT $IPT -A FORWARD -m state --state ESTABLISHED,RELATED -j ACCEPT |
[editar] iptables DROP & REJECT
Next we are going to define a couple of custom chains which will log DROP and REJECT events. This way we don't have to enter a separate line for each command entered. The logs will be sent to where your syslog default log messages are sent (usually /var/log/messages). Later I'm going to write a grep/sed script that will parse and organize these for easy viewing and set it as a daily cron job. This should be inserted immediately after the above definitions. When you are done, run the script again. It should have no affect on functionality of the network since we're just setting definitions. But it will ensure that we have no errors thusfar.
| Archivo: logging-firewall.sh |
# ********** LOGGING CHAINS ********** # # We are now going to create a few custom chains that will result in # logging of dropped packets. This will enable us to avoid having to # enter a log command prior to every drop we wish to log. The # first will be first log drops the other will log rejects. # Do not complain if chain already exists (so restart is clean) $IPT -N DROPl 2> /dev/null $IPT -A DROPl -m limit --limit 3/minute --limit-burst 10 -j LOG --log-prefix 'FIREWALL DROP BLOCKED:' $IPT -A DROPl -j DROP $IPT -N REJECTl 2> /dev/null $IPT -A REJECTl -m limit --limit 3/minute --limit-burst 10 -j LOG --log-prefix 'FIREWALL REJECT BLOCKED:' $IPT -A REJECTl -j REJECT $IPT -N DROP2 2> /dev/null $IPT -A DROP2 -m limit --limit 3/second --limit-burst 10 -j LOG --log-prefix 'FIREWALL DROP UNKNOWN:' $IPT -A DROP2 -j DROP $IPT -N REJECT2 2> /dev/null $IPT -A REJECT2 -m limit --limit 3/second --limit-burst 10 -j LOG --log-prefix 'FIREWALL REJECT UNKNOWN:' $IPT -A REJECT2 -j REJECT # For testing, a logging ACCEPT chain $IPT -N ACCEPTl 2> /dev/null $IPT -A ACCEPTl -m limit --limit 10/second --limit-burst 50 -j LOG --log-prefix 'FIREWALL ACCEPT:' $IPT -A ACCEPTl -j ACCEPT |
[editar] iptables flushing
Ok, now that we see our devices are being detected properly, we are going to insert a flush commands. So that when our rules are assigned it will be done cleanly. These lines should be inserted after our utilities definitions, the last one being:
| Archivo: sed-script.sed |
SED='/bin/sed' # Flush all existing chains and erase personal chains CHAINS=`cat /proc/net/ip_tables_names 2>/dev/null` for i in $CHAINS do $IPT -t $i -F done for i in $CHAINS do $IPT -t $i -X done |
[editar] Local interfaces
Now we're ready to start laying down some rules. First we are going to accept all packets from our loopback device if the ip address matches that of any of our local interfaces:
$IPT -A INPUT -i $LPDIF -s $LPDIP -j ACCEPT $IPT -A INPUT -i $LPDIF -s $EXTIP -j ACCEPT $IPT -A INPUT -i $LPDIF -s $INTIP1 -j ACCEPT $IPT -A INPUT -i $LPDIF -s $INTIP2 -j ACCEPT
[editar] Blocking broadcasting
Now we will block broadcasts both incoming and outgoing. This can prevent DoS attacks against us, as well as preventing our clients from being used to DoS someone else. This is part of what's called "Egress Protection". It's a do unto your neighbour sort of philosophy. If all SysAdmins followed this policy, than many of the more severe and costly DoS attacks would either not have occurred or been extremely limited.
# Blocking Broadcasts $IPT -A INPUT -i $EXTIF -d $EXTBC -j DROPl $IPT -A INPUT -i $INTIF1 -d $INTBC1 -j DROPl $IPT -A INPUT -i $INTIF2 -d $INTBC2 -j DROPl $IPT -A OUTPUT -o $EXTIF -d $EXTBC -j DROPl $IPT -A OUTPUT -o $INTIF1 -d $INTBC1 -j DROPl $IPT -A OUTPUT -o $INTIF2 -d $INTBC2 -j DROPl $IPT -A FORWARD -o $EXTIF -d $EXTBC -j DROPl $IPT -A FORWARD -o $INTIF1 -d $INTBC1 -j DROPl $IPT -A FORWARD -o $INTIF2 -d $INTBC2 -j DROPl
Now test the script once more to ensure we have no syntax errors. Also notice that we are using our newly defined DROPl chain. This means that the dropped packets will be logged.
[editar] Block WAN to LAN
Next we are going to block WAN access to our LAN if not specifically intended for our ISP assign IP:
# Block WAN access to internal network # This also stops nefarious crackers from using our network as a # launching point to attack other people # iptables translation: # "if input going into our external interface isn't being sent to our isp assigned # ip address, drop it like a hot potato" $IPT -A INPUT -i $EXTIF -d ! $EXTIP -j DROPl
[editar] Tightening the internal LAN
We're going to apply the same logic to our internal LAN. In other words, any packets not originating from our predefined internal network will be rejected:
# Now we will block internal addresses originating from anything but our # two predefined interfaces.....just remember that if you jack your # your laptop or another pc into one of these NIC's directly, you'll need # to ensure that they either have the same ip or that you add a line explicitly # that IP as well # Interface one/internal net one $IPT -A INPUT -i $INTIF1 -s ! $INTNET1 -j DROPl $IPT -A OUTPUT -o $INTIF1 -d ! $INTNET1 -j DROPl $IPT -A FORWARD -i $INTIF1 -s ! $INTNET1 -j DROPl $IPT -A FORWARD -o $INTIF1 -d ! $INTNET1 -j DROPl # Interface two/internal net two $IPT -A INPUT -i $INTIF2 -s ! $INTNET2 -j DROPl $IPT -A OUTPUT -o $INTIF2 -d ! $INTNET2 -j DROPl $IPT -A FORWARD -i $INTIF2 -s ! $INTNET2 -j DROPl $IPT -A FORWARD -o $INTIF2 -d ! $INTNET2 -j DROPl
Next we do some more Egress checking of outgoing packets and stop all icmp requests except for pinging:
# An additional Egress check $IPT -A OUTPUT -o $EXTIF -s ! $EXTNET -j DROPl # Block outbound ICMP (except for PING) $IPT -A OUTPUT -o $EXTIF -p icmp --icmp-type ! 8 -j DROPl $IPT -A FORWARD -o $EXTIF -p icmp --icmp-type ! 8 -j DROPl
Ok, where moving along now and we should test the script for errors.
[editar] Ports
Assuming an all clear we're going to start plugging some of the more bothersome port holes:
# COMmon ports: # 0 is tcpmux; SGI had vulnerability, 1 is common attack # 13 is daytime # 98 is Linuxconf # 111 is sunrpc (portmap) # 137:139, 445 is Microsoft # SNMP: 161,2 # Squid flotilla: 3128, 8000, 8008, 8080 # 1214 is Morpheus or KaZaA # 2049 is NFS # 3049 is very virulent Linux Trojan, mistakable for NFS # Common attacks: 1999, 4329, 6346 # Common Trojans 12345 65535 COMBLOCK="0:1 13 98 111 137:139 161:162 445 1214 1999 2049 3049 4329 6346 3128 8000 8008 8080 12345 65535" # TCP ports: # 98 is Linuxconf # 512-515 is rexec, rlogin, rsh, printer(lpd) # [very serious vulnerabilities; attacks continue daily] # 1080 is Socks proxy server # 6000 is X (NOTE X over SSH is secure and runs on TCP 22) # Block 6112 (Sun's/HP's CDE) TCPBLOCK="$COMBLOCK 98 512:515 1080 6000:6009 6112" # UDP ports: # 161:162 is SNMP # 520=RIP, 9000 is Sangoma # 517:518 are talk and ntalk (more annoying than anything) UDPBLOCK="$COMBLOCK 161:162 520 123 517:518 1427 9000 9 6346 3128 8000 8008 8080 12345 65535"
After defining the environment variables all we have to do is a simple for loop to assign rules to them all:
echo -n "FW: Blocking attacks to TCP port" for i in $TCPBLOCK; do echo -n "$i " $IPT -A INPUT -p tcp --dport $i -j DROPl $IPT -A OUTPUT -p tcp --dport $i -j DROPl $IPT -A FORWARD -p tcp --dport $i -j DROPl done echo ""
echo -n "FW: Blocking attacks to UDP port " for i in $UDPBLOCK; do echo -n "$i " $IPT -A INPUT -p udp --dport $i -j DROPl $IPT -A OUTPUT -p udp --dport $i -j DROPl $IPT -A FORWARD -p udp --dport $i -j DROPl done echo ""
Ok, now with iptables each time we run the script it simply appends these to already existing chains...so things are probably getting a bit messy. For that reason we're going to jump to the beginning of our script....right after the enviroment variables for sed and grep, but before those of EXTIP and EXTBC and add a loop that deletes and flushes. This ensure we're working from a clean state. We didn't want to do that before because we couldn't have tested our script without either shutting down our connection or dropping our firewall completely. This script first sets all policies to DROP, than flushes and deletes our chains. In order to ensure that we can still ssh back into our server after a script restart we are going to append an INPUT chain for ssh. This should always be placed at the end of the script for now. This done in order to prevent a window from opening up while we reset rules which is a common error made:
# Deny than accept: this keeps holes from opening up # while we close ports and such $IPT -P INPUT DROP $IPT -P OUTPUT DROP $IPT -P FORWARD DROP
# Flush all existing chains and erase personal chains CHAINS=`cat /proc/net/ip_tables_names 2>/dev/null` for i in $CHAINS; do $IPT -t $i -F done for i in $CHAINS; do $IPT -t $i -X done $IPT -A INPUT -i $INTIF1 -p tcp --dport 22 --syn -m state --state NEW -j ACCEPT
[editar] Sysctl's
Right afterwards we are going to activate the sysctl's for tcp_syncookies, icmp_echo_ignore_broadcasts, rp_filter, and accept_source_route. Heretofore many of the rules we've been "testing" haven't been able to actually work. In essence we were simply doing syntax error tests. Now our rules will be "for real":
echo 1 > /proc/sys/net/ipv4/tcp_syncookies echo 1 > /proc/sys/net/ipv4/icmp_echo_ignore_broadcasts
# Source Address Verification for f in /proc/sys/net/ipv4/conf/*/rp_filter; do echo 1 > $f done # Disable IP source routing and ICMP redirects for f in /proc/sys/net/ipv4/conf/*/accept_source_route; do echo 0 > $f done for f in /proc/sys/net/ipv4/conf/*/accept_redirects; do echo 0 > $f done echo 1 > /proc/sys/net/ipv4/ip_forward
Now we're going to add ftp connection tracking so that we won't get PASV errors when emerging packages:
# Opening up ftp connection tracking MODULES="ip_nat_ftp ip_conntrack_ftp" for i in $MODULES; do echo "Inserting module $i" modprobe $i done
[editar] Basic Service NAT
Now back to end of our script, we are going to open up services for systems behind our firewall. I have included services such as IRC, MSN, ICQ, and NFS, FTP, domain, and time. And some others. The important thing to note is that these will ONLY be availabe BEHIND the firewall. So this will not enable someone to ftp into your LAN:
IRC='ircd' MSN=1863 ICQ=5190 NFS='sunrpc' # We have to sync!! PORTAGE='rsync' OpenPGP_HTTP_Keyserver=11371 # All services ports are read from /etc/services TCPSERV="domain ssh http https ftp ftp-data mail pop3 pop3s imap3 imaps imap2 time $PORTAGE $IRC $MSN $ICQ $OpenPGP_HTTP_Keyserver" UDPSERV="domain time" echo -n "FW: Allowing inside systems to use service:" for i in $TCPSERV; do echo -n "$i " $IPT -A OUTPUT -o $EXTIF -p tcp -s $EXTIP --dport $i --syn -m state --state NEW -j ACCEPT $IPT -A FORWARD -i $INTIF1 -p tcp -s $INTNET1 --dport $i --syn -m state --state NEW -j ACCEPT $IPT -A FORWARD -i $INTIF2 -p tcp -s $INTNET2 --dport $i --syn -m state --state NEW -j ACCEPT done echo ""
echo -n "FW: Allowing inside systems to use service:" for i in $UDPSERV; do echo -n "$i " $IPT -A OUTPUT -o $EXTIF -p udp -s $EXTIP --dport $i -m state --state NEW -j ACCEPT $IPT -A FORWARD -i $INTIF1 -p udp -s $INTNET1 --dport $i -m state --state NEW -j ACCEPT $IPT -A FORWARD -i $INTIF2 -p udp -s $INTNET2 done echo ""
Now we're done all that's left is allowing us to ping the outside world by opening up pinging out of the firewall:
# Allow to ping out $IPT -A OUTPUT -o $EXTIF -p icmp -s $EXTIP --icmp-type 8 -m state --state NEW -j ACCEPT $IPT -A FORWARD -i $INTIF1 -p icmp -s $INTNET1 --icmp-type 8 -m state --state NEW -j ACCEPT $IPT -A FORWARD -i $INTIF2 -p icmp -s $INTNET2 --icmp-type 8 -m state --state NEW -j ACCEPT
# Allow firewall to ping internal systems $IPT -A OUTPUT -o $INTIF1 -p icmp -s $INTNET1 --icmp-type 8 -m state --state NEW -j ACCEPT $IPT -A OUTPUT -o $INTIF2 -p icmp -s $INTNET2 --icmp-type 8 -m state --state NEW -j ACCEPT
Now we are going to default to DROP and Log anything that's left in case we overlooked something. The ACCEPT entry's we made at the very beginning would come right before this in the final script:
# Log & block whatever is left $IPT -A INPUT -j DROPl $IPT -A OUTPUT -j REJECTl $IPT -A FORWARD -j DROPl
And you're done. I had a friend nmap and nessus my connection with this rule set and as far as both of them were concerned the only thing it was even slightly sure about was that the ip existed...other than that nothing. I can IRC, MSN, ICQ, ane emerge sync to my hearts content.
PART III will cover setting up some essential SOHO services like NFS and CUPS in a security conscious manner.
[editar] Scripts
A couple scripts.
[editar] The full script
Now here's the full script from the above information in all its glory (I also put the ssh forwarding in a more appropriate place):
| Archivo: iptables.sh |
# First set LC_ALL to en to avoid l10n problems when awk-ing IPs etc.
export LC_ALL="en"
# External interface
EXTIF=ppp0
# Internal interface
INTIF1=eth1
INTIF2=eth2
# Loop device/localhost
LPDIF=lo
LPDIP=127.0.0.1
LPDMSK=255.0.0.0
LPDNET="$LPDIP/$LPDMSK"
# Text tools variables
IPT='/sbin/iptables'
IFC='/sbin/ifconfig'
G='/bin/grep'
SED='/bin/sed'
# Last but not least, the users
JAMES=192.168.1.77
TERESA=192.168.2.77
# Deny then accept: this keeps holes from opening up
# while we close ports and such
$IPT -P INPUT DROP
$IPT -P OUTPUT DROP
$IPT -P FORWARD DROP
# Flush all existing chains and erase personal chains
CHAINS=`cat /proc/net/ip_tables_names 2>/dev/null`
for i in $CHAINS;
do
$IPT -t $i -F
done
for i in $CHAINS;
do
$IPT -t $i -X
done
echo 1 > /proc/sys/net/ipv4/tcp_syncookies
echo 1 > /proc/sys/net/ipv4/icmp_echo_ignore_broadcasts
# Source Address Verification
for f in /proc/sys/net/ipv4/conf/*/rp_filter;
do
echo 1 > $f
done
# Disable IP source routing and ICMP redirects
for f in /proc/sys/net/ipv4/conf/*/accept_source_route;
do
echo 0 > $f
done
for f in /proc/sys/net/ipv4/conf/*/accept_redirects;
do
echo 0 > $f
done
echo 1 > /proc/sys/net/ipv4/ip_forward
# Setting up external interface environment variables
EXTIP="`$IFC $EXTIF|$G addr:|$SED 's/.*addr:\([^ ]*\) .*/\1/'`"
#EXTBC="`$IFC $EXTIF|$G Bcast:|$SED 's/.*Bcast:\([^ ]*\) .*/\1/'`"
EXTBC="255.255.255.255"
EXTMSK="`$IFC $EXTIF|$G Mask:|$SED 's/.*Mask:\([^ ]*\)/\1/'`"
EXTNET="$EXTIP/$EXTMSK"
#echo "EXTIP=$EXTIP EXTBC=$EXTBC EXTMSK=$EXTMSK EXTNET=$EXTNET"
echo "EXTIP=$EXTIP EXTBC=$EXTBC EXTMSK=$EXTMSK EXTNET=$EXTNET"
# Due to absence of EXTBC I manually set it to 255.255.255.255
# this (hopefully) will serve the same purpose
# Setting up environment variables for internal interface one
INTIP1="`$IFC $INTIF1|$G addr:|$SED 's/.*addr:\([^ ]*\) .*/\1/'`"
INTBC1="`$IFC $INTIF1|$G Bcast:|$SED 's/.*Bcast:\([^ ]*\) .*/\1/'`"
INTMSK1="`$IFC $INTIF1|$G Mask:|$SED 's/.*Mask:\([^ ]*\)/\1/'`"
INTNET1="$INTIP1/$INTMSK1"
echo "INTIP1=$INTIP1 INTBC1=$INTBC1 INTMSK1=$INTMSK1 INTNET1=$INTNET1"
#Setting up environment variables for internal interface two
INTIP2="`$IFC $INTIF2|$G addr:|$SED 's/.*addr:\([^ ]*\) .*/\1/'`"
INTBC2="`$IFC $INTIF2|$G Bcast:|$SED 's/.*Bcast:\([^ ]*\) .*/\1/'`"
INTMSK2="`$IFC $INTIF2|$G Mask:|$SED 's/.*Mask:\([^ ]*\)/\1/'`"
INTNET2="$INTIP2/$INTMSK2"
echo "INTIP2=$INTIP2 INTBC2=$INTBC2 INTMSK2=$INTMSK2 INTNET2=$INTNET2"
# We are now going to create a few custom chains that will result in
# logging of dropped packets. This will enable us to avoid having to
# enter a log command prior to every drop we wish to log. The
# first will be first log drops the other will log rejects.
# Do not complain if chain already exists (so restart is clean)
$IPT -N DROPl 2> /dev/null
$IPT -A DROPl -j LOG --log-prefix 'DROPl:'
$IPT -A DROPl -j DROP
$IPT -N REJECTl 2> /dev/null
$IPT -A REJECTl -j LOG --log-prefix 'REJECTl:'
$IPT -A REJECTl -j REJECT
# Now we are going to accpet all traffic from our loopback device
# if the IP matches any of our interfaces.
$IPT -A INPUT -i $LPDIF -s $LPDIP -j ACCEPT
$IPT -A INPUT -i $LPDIF -s $EXTIP -j ACCEPT
$IPT -A INPUT -i $LPDIF -s $INTIP1 -j ACCEPT
$IPT -A INPUT -i $LPDIF -s $INTIP2 -j ACCEPT
# Blocking Broadcasts
$IPT -A INPUT -i $EXTIF -d $EXTBC -j DROPl
$IPT -A INPUT -i $INTIF1 -d $INTBC1 -j DROPl
$IPT -A INPUT -i $INTIF2 -d $INTBC2 -j DROPl
$IPT -A OUTPUT -o $EXTIF -d $EXTBC -j DROPl
$IPT -A OUTPUT -o $INTIF1 -d $INTBC1 -j DROPl
$IPT -A OUTPUT -o $INTIF2 -d $INTBC2 -j DROPl
$IPT -A FORWARD -o $EXTIF -d $EXTBC -j DROPl
$IPT -A FORWARD -o $INTIF1 -d $INTBC1 -j DROPl
$IPT -A FORWARD -o $INTIF2 -d $INTBC2 -j DROPl
# Block WAN access to internal network
# This also stops nefarious crackers from using our network as a
# launching point to attack other people
# iptables translation:
# "if input going into our external interface does not originate from our isp assigned
# ip address, drop it like a hot potato
$IPT -A INPUT -i $EXTIF -d ! $EXTIP -j DROPl
# Now we will block internal addresses originating from anything but our
# two predefined interfaces.....just remember that if you jack your
# your laptop or another pc into one of these NIC's directly, you'll need
# to ensure that they either have the same ip or that you add a line explicitly
# for that IP as well
# Interface one/internal net one
$IPT -A INPUT -i $INTIF1 -s ! $INTNET1 -j DROPl
$IPT -A OUTPUT -o $INTIF1 -d ! $INTNET1 -j DROPl
$IPT -A FORWARD -i $INTIF1 -s ! $INTNET1 -j DROPl
$IPT -A FORWARD -o $INTIF1 -d ! $INTNET1 -j DROPl
# Interface two/internal net two
$IPT -A INPUT -i $INTIF2 -s ! $INTNET2 -j DROPl
$IPT -A OUTPUT -o $INTIF2 -d ! $INTNET2 -j DROPl
$IPT -A FORWARD -i $INTIF2 -s ! $INTNET2 -j DROPl
$IPT -A FORWARD -o $INTIF2 -d ! $INTNET2 -j DROPl
# An additional Egress check
$IPT -A OUTPUT -o $EXTIF -s ! $EXTNET -j DROPl
# Block outbound ICMP (except for PING)
$IPT -A OUTPUT -o $EXTIF -p icmp --icmp-type ! 8 -j DROPl
$IPT -A FORWARD -o $EXTIF -p icmp --icmp-type ! 8 -j DROPl
# COMmon ports:
# 0 is tcpmux; SGI had vulnerability, 1 is common attack
# 13 is daytime
# 98 is Linuxconf
# 111 is sunrpc (portmap)
# 137:139, 445 is Microsoft
# SNMP: 161,2
# Squid flotilla: 3128, 8000, 8008, 8080
# 1214 is Morpheus or KaZaA
# 2049 is NFS
# 3049 is very virulent Linux Trojan, mistakable for NFS
# Common attacks: 1999, 4329, 6346
# Common Trojans 12345 65535
COMBLOCK="0:1 13 98 111 137:139 161:162 445 1214 1999 2049 3049 4329 6346 3128 8000 8008 8080 12345 65535"
# TCP ports:
# 98 is Linuxconf
# 512-515 is rexec, rlogin, rsh, printer(lpd)
# [very serious vulnerabilities; attacks continue daily]
# 1080 is Socks proxy server
# 6000 is X (NOTE X over SSH is secure and runs on TCP 22)
# Block 6112 (Sun's/HP's CDE)
TCPBLOCK="$COMBLOCK 98 512:515 1080 6000:6009 6112"
# UDP ports:
# 161:162 is SNMP
# 520=RIP, 9000 is Sangoma
# 517:518 are talk and ntalk (more annoying than anything)
UDPBLOCK="$COMBLOCK 161:162 520 123 517:518 1427 9000"
echo -n "FW: Blocking attacks to TCP port "
for i in $TCPBLOCK;
do
echo -n "$i "
$IPT -A INPUT -p tcp --dport $i -j DROPl
$IPT -A OUTPUT -p tcp --dport $i -j DROPl
$IPT -A FORWARD -p tcp --dport $i -j DROPl
done
echo ""
echo -n "FW: Blocking attacks to UDP port "
for i in $UDPBLOCK;
do
echo -n "$i "
$IPT -A INPUT -p udp --dport $i -j DROPl
$IPT -A OUTPUT -p udp --dport $i -j DROPl
$IPT -A FORWARD -p udp --dport $i -j DROPl
done
echo ""
# Opening up ftp connection tracking
MODULES="ip_nat_ftp ip_conntrack_ftp"
for i in $MODULES;
do
echo "Inserting module $i"
modprobe $i
done
# Defining some common chat clients. Remove these from your accepted list for better security.
# ICQ and AOL are 5190
# MSN is 1863
# Y! is 5050
# Jabber is 5222
# Y! and Jabber ports not added by author and therefore left out of the script
IRC='ircd'
MSN=1863
ICQ=5190
NFS='sunrpc'
# We have to sync!!
PORTAGE='rsync'
OpenPGP_HTTP_Keyserver=11371
# All services ports are read from /etc/services
TCPSERV="domain ssh http https ftp ftp-data mail pop3 pop3s imap3 imaps imap2 \
time $PORTAGE $IRC $MSN $ICQ $OpenPGP_HTTP_Keyserver"
UDPSERV="domain time"
echo -n "FW: Allowing inside systems to use service:"
for i in $TCPSERV;
do
echo -n "$i "
$IPT -A OUTPUT -o $EXTIF -p tcp -s $EXTIP --dport $i --syn -m state --state NEW -j ACCEPT
$IPT -A FORWARD -i $INTIF1 -p tcp -s $INTNET1 --dport $i --syn -m state --state NEW -j ACCEPT
$IPT -A FORWARD -i $INTIF2 -p tcp -s $INTNET2 --dport $i --syn -m state --state NEW -j ACCEPT
done
echo ""
echo -n "FW: Allowing inside systems to use service:"
for i in $UDPSERV;
do
echo -n "$i "
$IPT -A OUTPUT -o $EXTIF -p udp -s $EXTIP --dport $i -m state --state NEW -j ACCEPT
$IPT -A FORWARD -i $INTIF1 -p udp -s $INTNET1 --dport $i -m state --state NEW -j ACCEPT
$IPT -A FORWARD -i $INTIF2 -p udp -s $INTNET2 --dport $i -m state --state NEW -j ACCEPT
done
echo ""
# Allow to ping out
$IPT -A OUTPUT -o $EXTIF -p icmp -s $EXTIP --icmp-type 8 -m state --state NEW -j ACCEPT
$IPT -A FORWARD -i $INTIF1 -p icmp -s $INTNET1 --icmp-type 8 -m state --state NEW -j ACCEPT
$IPT -A FORWARD -i $INTIF2 -p icmp -s $INTNET2 --icmp-type 8 -m state --state NEW -j ACCEPT
# Allow firewall to ping internal systems
$IPT -A OUTPUT -o $INTIF1 -p icmp -s $INTNET1 --icmp-type 8 -m state --state NEW -j ACCEPT
$IPT -A OUTPUT -o $INTIF2 -p icmp -s $INTNET2 --icmp-type 8 -m state --state NEW -j ACCEPT
$IPT -A INPUT -i $INTIF1 -p tcp --dport 22 --syn -m state --state NEW -j ACCEPT
$IPT -t nat -A PREROUTING -j ACCEPT
$IPT -t nat -A POSTROUTING -o $EXTIF -s $INTNET1 -j MASQUERADE
$IPT -t nat -A POSTROUTING -o $EXTIF -s $INTNET2 -j MASQUERADE
$IPT -t nat -A POSTROUTING -j ACCEPT
$IPT -t nat -A OUTPUT -j ACCEPT
$IPT -A INPUT -p tcp --dport auth --syn -m state --state NEW -j ACCEPT
$IPT -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT
$IPT -A OUTPUT -m state --state ESTABLISHED,RELATED -j ACCEPT
$IPT -A FORWARD -m state --state ESTABLISHED,RELATED -j ACCEPT
# Block and log what me may have forgot
$IPT -A INPUT -j DROPl
$IPT -A OUTPUT -j REJECTl
$IPT -A FORWARD -j DROPl
|
[editar] Another iptables startup script
Another iptables startup script designed for a local linux router / linux server.
| Archivo: /etc/init.d/iptables |
#! /sbin/runscript
depend() {
before net
}
start() {
ebegin "Starting firewall"
modprobe ip_conntrack_ftp
# reset all tables
iptables -t filter -F
iptables -t nat -F
# delete all user chains
iptables -t filter -X
iptables -t nat -X
# drop all packets by default
iptables -t filter -P INPUT DROP
iptables -t filter -P FORWARD DROP
iptables -t filter -P OUTPUT DROP
# create needed user-chains
iptables -N drop_bad_packets
# create a chain, that filters all bad packets:
# drop all tcp-packets, that are not established and don't request a
# new connection and drop every "unclean" package
iptables -A drop_bad_packets -p tcp ! --syn -m state \
--state NEW -j DROP
iptables -A drop_bad_packets -m state --state INVALID -j DROP
# do not accept, send or forward illegal packets
iptables -A INPUT -j drop_bad_packets
iptables -A OUTPUT -j drop_bad_packets
iptables -A FORWARD -j drop_bad_packets
# drop all packets that are comming from/going to 127.0.0.1 and
# are not going through loopback device
iptables -A INPUT -i ! lo -s 127.0.0.1 -j DROP
iptables -A INPUT -i ! lo -d 127.0.0.1 -j DROP
iptables -A OUTPUT -o ! lo -s 127.0.0.1 -j DROP
iptables -A OUTPUT -o ! lo -d 127.0.0.1 -j DROP
# allow masqueraded forwarding for eth0 device
for i in $MASQUERADINGDEVICES ; do
iptables -t nat -A POSTROUTING -o "$i" -j MASQUERADE
done
# allow forwarding connections
for i in $FORWARDINGDEVICES ; do
src="`echo $i | awk -F: '{ print $1 }'`"
dest="`echo $i | awk -F: '{ print $2 }'`"
if [ -z "$src" ] || [ -z "$dest" ] ; then
ewarn "wrong FORWARDINGDEVICES entry (ignored): '$i'"
continue
fi
iptables -A FORWARD -i "$src" -o "$dest" -j ACCEPT
iptables -A FORWARD -i "$dest" -o "$src" -m state \
--state ESTABLISHED,RELATED -j ACCEPT
done
# allow all connections that are comming from or going to the
# loopback device and are from local host (other hosts wont be
# able to write to our loopback device)
iptables -A INPUT -i lo -j ACCEPT
iptables -A OUTPUT -o lo -j ACCEPT
for i in $NETDEVICES ; do
# allow incoming data for established or related connections
iptables -A INPUT -i "$i" -m state \
--state ESTABLISHED,RELATED -j ACCEPT
# allow incoming ping requests
iptables -A INPUT -i "$i" -m state \
--state NEW --protocol icmp \
--icmp-type 8 -j ACCEPT
# allow all outging data
iptables -A OUTPUT -o "$i" -j ACCEPT
done
# allow all traffic from FULLACCESSIPS
for i in $FULLACCESSIPS ; do
device="`echo $i | awk -F: '{ print $1 }'`"
ip="`echo $i | awk -F: '{ print $2 }'`"
if [ -z "$ip" ] || [ -z "$device" ] ; then
ewarn "wrong FULLACCESSIPS entry (ignored): '$i'"
continue
fi
iptables -A INPUT -i "$device" -m state \
--state NEW \
--source "$ip" -j ACCEPT
done
# allow incomming connections to tcp ports
for i in $INCOMINGPORTS ; do
device="`echo $i | awk -F: '{ print $1 }'`"
proto="`echo $i | awk -F: '{ print $2 }'`"
ports="`echo $i | awk -F: '{ print $3 }'`"
if [ -z "$device" ] || [ -z "$ports" ] || [ -z "$proto" ]; then
ewarn "wrong INCOMINGPORTS entry (ignored): '$i'"
continue
fi
iptables -A INPUT -i "$device" -m state -m multiport \
--state NEW --protocol "$proto" \
--dport "$ports" -j ACCEPT
done
# reject all other incoming data instead of just dropping them
iptables -A INPUT -j REJECT
echo 0 >/proc/sys/net/ipv4/tcp_ecn
echo 1 >/proc/sys/net/ipv4/tcp_syncookies
for f in /proc/sys/net/ipv4/conf/*/rp_filter; do
echo 1 >"$f"
done
# activate IP-Forwarding
echo 1 >/proc/sys/net/ipv4/ip_dynaddr
echo 1 >/proc/sys/net/ipv4/ip_forward
eend 0
}
stop() {
echo 0 >/proc/sys/net/ipv4/tcp_ecn
echo 0 >/proc/sys/net/ipv4/tcp_syncookies
echo 0 >/proc/sys/net/ipv4/ip_forward
echo 0 >/proc/sys/net/ipv4/ip_dynaddr
for f in /proc/sys/net/ipv4/conf/*/rp_filter; do
echo 0 >"$f"
done
ebegin "Stopping firewall"
for a in `cat /proc/net/ip_tables_names`; do
/sbin/iptables -F -t "$a"
/sbin/iptables -X -t "$a"
if [ "$a" == nat ]; then
/sbin/iptables -t nat -P PREROUTING ACCEPT
/sbin/iptables -t nat -P POSTROUTING ACCEPT
/sbin/iptables -t nat -P OUTPUT ACCEPT
elif [ "$a" == mangle ]; then
/sbin/iptables -t mangle -P PREROUTING ACCEPT
/sbin/iptables -t mangle -P INPUT ACCEPT
/sbin/iptables -t mangle -P FORWARD ACCEPT
/sbin/iptables -t mangle -P OUTPUT ACCEPT
/sbin/iptables -t mangle -P POSTROUTING ACCEPT
elif [ "$a" == filter ]; then
/sbin/iptables -t filter -P INPUT ACCEPT
/sbin/iptables -t filter -P FORWARD ACCEPT
/sbin/iptables -t filter -P OUTPUT ACCEPT
fi
done
eend $?
}
|
Note the following file is an EXAMPLE - DO NOT USE IT WITHOUT MODIFICATION
| Archivo: /etc/conf.d/iptables |
# open incoming ports (device:proto:ports) INCOMINGPORTS="eth0:tcp:22,80,443,1500-1510 eth0:udp:53" # allow data connections through these devices NETDEVICES="eth0 ppp0 tun1" # allow forwardings on these devices (src:dest) FORWARDINGDEVICES="eth0:ppp0 eth0:tun1" # masquerade ips on these devices MASQUERADINGDEVICES="ppp0" # allow all traffic from these ips (device:ip) FULLACCESSIPS="eth0:192.168.0.4" |
[editar] Author's Original Script
| Archivo: firewall.sh |
#!/bin/bash IPTABLES='/sbin/iptables' # Set interface values EXTIF='ppp0' INTIF1='eth1' INTIF2='eth2' # enable ip forwarding in the kernel /bin/echo 1 > /proc/sys/net/ipv4/ip_forward # flush rules and delete chains $IPTABLES -F $IPTABLES -X # enable masquerading to allow LAN internet access $IPTABLES -t nat -A POSTROUTING -o $EXTIF -j MASQUERADE # forward LAN traffic from $INTIF1 to Internet interface $EXTIF $IPTABLES -A FORWARD -i $INTIF1 -o $EXTIF -m state --state NEW,ESTABLISHED -j ACCEPT # forward LAN traffic from $INTIF2 to Internet interface $EXTIF $IPTABLES -A FORWARD -i $INTIF2 -o $EXTIF -m state --state NEW,ESTABLISHED -j ACCEPT #echo -e " - Allowing access to the SSH server" $IPTABLES -A INPUT --protocol tcp --dport 22 -j ACCEPT #echo -e " - Allowing access to the HTTP server" $IPTABLES -A INPUT --protocol tcp --dport 80 -j ACCEPT # block out all other Internet access on $EXTIF $IPTABLES -A INPUT -i $EXTIF -m state --state NEW,INVALID -j DROP $IPTABLES -A FORWARD -i $EXTIF -m state --state NEW,INVALID -j DROP |
| Nota: This script was written by someone on another forum....I've since lost the address to the thread or forum..., but thanks goes to him. |
It can be found on: HOWTO_Iptables_and_stateful_firewalls
[editar] Reset iptables
iptables -P INPUT ACCEPT iptables -P FORWARD ACCEPT iptables -P OUTPUT ACCEPT iptables -F iptables -X
[editar] Hardware Related Information
[editar] Interface configuration
The author created this document is using a PPPoE connection to the internet and the 2.6.x kernel.
However, the only adaptation that would need to be made is to replace 'ppp0' with 'eth0' (or whatever NIC you have facing the internet -- this will become clear later).
In my set up, I have three NIC's, one is connected to the WAN through PPPoE, the other two to my internal network. In order for them all to play nicely with iptables and masquerading (NAT'ing), they must be set to different subnets. For example, the two NIC's connected to my internal computers, e.g., the “internal NIC's”, are assigned: 192.168.1.1 and 192.168.2.1 respectively. It should be noted here that it is perfectly acceptable to connect these internal NIC's to any network capable device, such as a switch or hub. For pppoe connections we make sure the NIC connected to the outside world, e.g. the external NIC is not assigned any ip....its entries in /etc/conf.d/net should be left blank. This is due to pppoe acting as a virtual device which handles bringing up the NIC. We must also assign proper netmasks and broadcast values to these interfaces. Your /etc/conf.d/net should look like these:
| Archivo: /etc/conf.d/net |
|
Server: # For pppoe connections you do not want to set values for eth0, simply add # net.ppp0 or rp-pppoe to your default runlevel config_eth1=( "192.168.1.1 broadcast 192.168.1.255 netmask 255.255.255.0" ) config_eth2=( "192.168.2.1 broadcast 192.168.2.255 netmask 255.255.255.0" ) Client One: config_eth0=( "192.168.1.77 broadcast 192.168.1.255 netmask 255.255.255.0" ) gateway_eth0=( "default via 192.168.1.1" ) Client Two: config_eth0=( "192.168.2.77 broadcast 192.168.2.255 netmask 255.255.255.0" ) gateway_eth0=( "default via eth0/192.168.2.1" ) |
The gateways for the clients are set to the internal ip's of the NIC on the server as should be expected. Now add all the interfaces to the default run level and restart connections:
[editar] Start network cards
rc-update add net.eth1 default; rc-update add net.eth2 default; rc-update add net.ppp0 default; /etc/init.d/net.eth1 restart; /etc/init.d/net.eth2 restart; /etc/init.d/net.ppp0 restart;
Now verify that you are connected to the internet on the server machine (the clients will not be.....yet) and that all the interfaces can ping each other.
[editar] Server
ping www.google.com; ping 192.168.1.78 ping 192.168.2.78 ping 192.168.1.77 ping 192.168.2.77
Next ensure that your clients have appropriate DNS's set in your /etc/resolv.conf.
